Showing posts with label lubricants. Show all posts
Showing posts with label lubricants. Show all posts

Saturday, 7 March 2015

Types of Synthetic Oils Complete guide

Synthetic oils

  1. Polyalpha-olefin (PAO)
  2. Synthetic esters
  3. Polyalkylene glycols (PAG)
  4. Phosphate esters
  5. Alkylated naphthalenes (AN)
  6. Silicate esters
  7. Ionic fluids
Solid lubricants
PTFE: polytetrafluoroethylene (PTFE) is typically used as a coating layer on, for example, cooking utensils to provide a non-stick surface. Its usable temperature range up to 350 °C and chemical inertness make it a useful additive in special greases. Under extreme pressures, PTFE powder or solids is of little value as it is soft and flows away from the area of contact. Ceramic or metal or alloy lubricants must be used then. "Teflon®" is a brand of PTFE owned by DuPont Co.

Inorganic solids: Graphite, hexagonal boron nitride, molybdenum disulfide and tungsten disulfide are examples of materials that can be used as solid lubricants, often to very high temperature. The use of some such materials is sometimes restricted by their poor resistance to oxidation (e.g., molybdenum disulfide can only be used up to 350°C in air, but 1100°C in reducing environments).

Metal/alloy: Metal alloys, composites and pure metals can be used as grease additives or the sole constituents of sliding surfaces and bearings. Cadmium and Gold are used for plating surfaces which gives them good corrosion resistance and sliding properties, Lead, Tin, Zinc alloys and various Bronze alloys are used as sliding bearings, or their powder can be used to lubricate sliding surfaces alone, or as additives to

Aqueous lubrication

Aqueous lubrication is of interest in a number of technological applications. Strongly hydrated brush polymers such as PEG can act as lubricants at liquid solid interfaces. By continuous rapid exchange of bound water with other free water molecules, these polymer films keep the surfaces separated while maintaining a high fluidity at the brush–brush interface at high compressions, thus leading to a very low coefficient of friction.

Other relevant phenomena

'Glaze' formation (high temperature wear)

A further phenomenon that has undergone investigation in relation to high temperature wear prevention and lubrication, is that of a compacted oxide layer glaze formation. This is the generation of a compacted oxide layer which sinters together to form a crystalline 'glaze' (not the amorphous layer seen in pottery) generally at high temperatures, from metallic surfaces sliding against each other (or a metallic surface against a ceramic surface). Due to the elimination of metallic contact and adhesion by the generation of oxide, friction and wear is reduced. Effectively, such a surface is self-lubricating.

As the 'glaze' is already an oxide, it can survive to very high temperatures in air or oxidising environments. However, it is disadvantaged by it being necessary for the base metal (or ceramic) having to undergo some wear first to generate sufficient oxide debris.

 Additives

A large number of additives are used to impart performance characteristics to the lubricants. The main families of additives are:
  • Antioxidants
  • Detergents
  • Anti-wear
  • Metal deactivators
  • Corrosion inhibitors, Rust inhibitors
  • Friction modifiers
  • Extreme Pressure
  • Anti-foaming agents
  • Viscosity index improvers
  • Demulsifying/Emulsifying
  • Stickiness improver, provide adhesive property towards tool surface (in metalworking)
  • Complexing agent (in case of greases)
Note that many of the basic chemical compounds used as detergents (example: calcium sulfonate) serve the purpose of the first seven items in the list as well. Usually it is not economically or technically feasible to use a single do-it-all additive compound. Oils for hypoid gear lubrication will contain high content of EP additives. Grease lubricants may contain large amount of solid particle friction modifiers, such as graphite, molybdenum sulfide.

Application by fluid types

  1. Automotive
    1. Engine oils
      1. Petrol (Gasoline) engine oils
      2. Diesel engine oils
    2. Automatic transmission fluid
    3. Gearbox fluids
    4. Brake fluids
    5. Hydraulic fluids
  2. Tractor (one lubricant for all systems)
    1. Universal Tractor Transmission Oil – UTTO
    2. Super Tractor Oil Universal – STOU – includes engine
  3. Other motors
    1. 2-stroke engine oils
  4. Industrial
    1. Hydraulic oils
    2. Air compressor oils
    3. Gas Compressor oils
    4. Gear oils
    5. Bearing and circulating system oils
    6. Refrigerator compressor oils
    7. Steam and gas turbine oils
  5. Aviation
    1. Gas turbine engine oils
    2. Piston engine oils
  6. Marine
    1. Crosshead cylinder oils
    2. Crosshead Crankcase oils
    3. Trunk piston engine oils
    4. Stern tube lubricants

Complete Description of Lubricants

Types of lubricants

The Complete Description of Lubricants

In 1999, an estimated 37,300,000 tons of lubricants were consumed worldwide.Automotive applications dominate, but other industrial, marine, and metal working applications are also big consumers of lubricants. Although air and other gas-based lubricants are known, e.g., in fluid bearings), liquid and solid lubricants dominate the market, especially the former.



Lubricants are generally composed of a majority of base oil plus a variety of additives to impart desirable characteristics. Although generally lubricants are based on one type of base oil, mixtures of the base oils also are used to meet performance requirements.

Base oil groups

Mineral oil term is used to encompass lubricating base oil derived from crude oil. The American Petroleum Institute (API) designates several types of lubricant base oil
  • Group I – Saturates <90% and/or sulfur >0.03%, and Society of Automotive Engineers (SAE) viscosity index (VI) of 80 to 120
Manufactured by solvent extraction, solvent or catalytic dewaxing, and hydro-finishing processes. Common Group I base oil are 150SN (solvent neutral), 500SN, and 150BS (brightstock)
  • Group II – Saturates over 90% and sulfur under 0.03%, and SAE viscosity index of 80 to 120

Manufactured by hydrocracking and solvent or catalytic dewaxing processes. Group II base oil has superior anti-oxidation properties since virtually all hydrocarbon molecules are saturated. It has water-white color.
  • Group III – Saturates > 90%, sulfur <0.03%, and SAE viscosity index over 120
Manufactured by special processes such as isohydromerization. Can be manufactured from base oil or slax wax from dewaxing process.
  • Group IV – Polyalphaolefins (PAO)
  • Group V – All others not included above such as naphthenics, PAG, esters.
In North America, Groups III, IV and V are now described as synthetic lubricants, with group III frequently described as synthesised hydrocarbons, or SHCs. In Europe, only Groups IV and V may be classed as synthetics.

The lubricant industry commonly extends this group terminology to include:
  • Group I+ with a Viscosity Index of 103–108 
  • Group II+ with a Viscosity Index of 113–119 
  • Group III+ with a Viscosity Index of at least 140
Can also be classified into three categories depending on the prevailing compositions:
  • Paraffinic 
  • Naphthenic 
  • Aromatic
Lubricants for internal combustion engines contain additives to reduce oxidation and improve lubrication. The main constituent of such lubricant product is called the base oil, base stock. While it is advantageous to have a high-grade base oil in a lubricant, proper selection of the lubricant additives is equally as important. Thus some poorly selected formulation of PAO lubricant may not last as long as more expensive formulation of Group III+ lubricant.

Biolubricants made from vegetable oils and other renewable sources

These are primarily triglyceride esters derived from plants and animals. For lubricant base oil use the vegetable derived materials are preferred. Common ones include high oleic canola oil, castor oil, palm oil, sunflower seed oil and rapeseed oil from vegetable, and Tall oil from tree sources. Many vegetable oils are often hydrolyzed to yield the acids which are subsequently combined selectively to form specialist synthetic esters. Other naturally derived lubricants include lanolin (wool grease, a natural water repellent).

Whale oil was a historically important lubricant, with some uses up to the latter part of the 20th century as a friction modifier additive for automatic transmission fluid.

In 2008, the bio lubricant market was around 1% of UK lubricant sales in a total lubricant market of 840,000 tonnes/year.

Lanolin is a natural water repellent, derived from sheep wool grease, and is an alternative to the more common petro-chemical based lubricants. This lubricant is also a corrosion inhibitor, protecting against rust, salts, and acids.

Water can also be used on its own, or as a major component in combination with one of the other base oils. Commonly used in engineering processes, such as milling and lathe turning.